Front Door: Keep the Inside When It’s Cold Outside

It is uncomfortable when the house is cold and it’s cold outside so during the winter months we want to do as much as we can to stay warm. There is a lot you can do in order to stay warm in terms of heating your house.

When it is cold there is nothing cosier than a soft fleece blanket. This is wonderful when you are lounging around and watching a movie. Grab a nice warm cup of hot chocolate and enjoy yourself. Snuggling up next to someone on the couch will make the experience more pleasant.

A gas heater is a great way to heat up the room really quickly. The flame of the gas heater is so hot that it almost instantly heats up a room. This is ideal if you want to warm up the bedroom after you’ve had a bath or shower. So you don’t have to get dressed in a cold room.

Panel heaters are ideal for keeping rooms warm at a reasonable temperature. It won’t make the room too hot but will rather maintain a good room temperature. If you are planning on spending a whole day in one room then this could be an option for you.

There are also a variety of other types of heaters that you could consider. It all depends on what you prefer.

If you want to make a bolder change to keep your house warm then you could invest in underfloor heating and insulation. These two options will keep your house warm from the bottom and the top. The floor will emit heat and the ceiling will keep the heat in, so you will be cosy in the middle.

Other ways to keep the heat in is by investing in a thick solid wooden front door. Getting the right front door can make a big difference to the overall temperature in your home. The front door needs to be a perfect fit. If there is a slight difference in the size of the door against the frame the wind could cause the door to rattle. This rattling door could allow cold wind to pierce in through the sides. It is ideal to get a door made by a custom door manufacturer who will ensure that the door and frame are made to fit perfectly.

New and Handy Ways to Light Up Your Garage or Workshop

A garage or workshop can be downright dangerous if you’re stuck in the dark or have little light. Not only that, but you probably won’t be very handy or productive without decent lighting. A well lit garage is safer and can make your work more fast and accurate as well. Luckily, there are a few types of lights available these days that make your garage a more hospitable environment for whatever project or fix that you need to work on.

LED Work Lights

A halogen work light is the traditional way to light up a garage, as you get a ton of light in a fairly portable form factor. However, halogen lights can be difficult to move around, not necessarily from their weight, but from the fact that they are always hot to the touch. In fact, they get hotter and hotter the longer they are used. Many people even end up burning their hand when trying to handle these lights due to their heat. This can also be a fire hazard should you leave the light unattended or near something flammable. Good thing LED work lights were invented then. LED work lights are smaller and more portable than traditional halogen work lights, but have many other advantages. First, they won’t burn your fingers when you touch them. In fact, LED’s generate very little heat at all. Also, LED’s are much smaller bulbs than halogen based lamps, therefore they can be brighter with less weight, and therefore much more portable. LED’s are also immensely durable for any project.

Battery Operated LED Lights

Another handy option that is great for any dark space around a garage is a battery operated LED light. These lights run on batteries, usually AA or triple A and can be hung, stuck or attached to any space around the garage that isn’t feasible for an electrically powered light. Some examples include inside of cabinets, inside of drawers, above or below a work desk, in between storage areas or hallways. There are also battery operated lights which have a motion detection feature, making them turn on as soon as you or someone else move near the light, and automatically turn off when no movement is detected for a period of time. These types of lights are great for a dark pathway or hall where there might not be an electrical outlet. These can also be handy inside storage bins, closets or drawers, as you don’t need to bother with turning a light on and off while you work.

8 Awesome Gas Hacks to Save Your Money

The prices of gas keep fluctuating quite often. They are also generally higher than most utility bills we have to settle regularly. These constant fluctuations, combined with the higher prices, do put some strains on our budgets. They also force us to dig deeper into our pockets so that we can keep driving our cars.

Given the overall significance of cars in our lives, we just have to find a way out of these higher costs. To navigate this situation better, you must equip yourself with some hacks. We have assembled some of the top eight awesome hacks you can make if you ever hope to spend as little as possible on gas.

1. Time your purchase appropriately

Be wise. Gas prices fluctuate from time to time. You should, therefore, time your purchase to coincide with those moments when they go for the least possible amounts. Generally speaking, gas is cheaper in the mornings and weekdays. This is because the demand for gas at such times is generally lower. You should, therefore, make every effort to purchase your supply of gas at such times.

On the contrary, the prices surge on weekends, in festive seasons, and on holidays. This is because the demand for gas is at its peak during these times. You should, therefore, avoid these times as much as possible.

2. Minimize your usage of the car’s internal features and systems

The typical modern car is loaded with tons of features. Among these are built-in radio, screens, music players, speakers, GPRS, Wi-Fi, and indeed, more besides. These features all compete for the meager engine power to operate.

As part of your effort to save money on gas, you may wish to scale down on your usage of these extra features. Switch them as long as possible and only on when you absolutely have to use them.

As a long-term measure, you may also consider substituting those features with other devices. For instance, you may wish to use your phone to play music while driving rather than the car’s built-in audio system. This will see to it that you save some engine power and of course spend less on gas in the process.

3. Drive slowly all the time

Consider reducing your driving speed. Studies upon studies have deduced, almost without exception, that you consume less gas when you drive slower. The logic is simple, the engine burns less fuel at lower speeds than at higher speeds.

Moreover, you also give your engine ample time to completely burn the fuel when you drive slowly as opposed to when you drive at higher speeds. This boosts your engine’s fuel efficiency. It also brings along the accompanying benefit of reducing the costs of gas in the long run.

Bonus Tip: You are strongly urged to drive at speeds below 50 mph. This is quite comfortable and fuel-saving.

4. Turn off the engine when idling

While driving in crowded and congested cities and towns, you will, from time-to-time have to stop, either at a zebra crossing, or when the traffic light is red or you are in a jam. Most motorists leave their engines running at such times. The engine still consumes some amount of fuel at such times. The accumulation of gas used may be devastating, especially if the trend goes on unabated repeatedly for quite some time.

This is why you are strongly urged to turn off your engines whenever you are idle. Doing so curbs the wastage of gas and with it, come greater savings on your part.

5. Inflate your tires

Have you ever attempted to ride bicycles on flat tires? That is exactly what happens when you drive on low tire pressure or flat tires. You require plenty of effort and engine power to generate the needed torque. Such extra effort translates to higher fuel consumption which also means spending more money on the whole.

To prevent this problem, you are advised to inflate your tires at full pressure at all times. Fully-pressured tires give you a smoother ride, require less torque to rotate, are easier to engage, and ultimately demand less money on your part.

Bonus Tip: The recommended pressure for your car’s tires is 30-35 pounds per square inch.

6. Use only the recommended oil

Each car has a corresponding manufacturer’s recommended oil. This is the oil which, in the wisdom of the manufacturer, works best for your car’s engine. You should, therefore, strive as much as possible, to use only this oil at all times. In case it is not available in your area, or you do not have the means to acquire it, settle for the closest variation.

Other than that, there are some factors you have to consider while on the lookout for the right oil for your car. The right one has to contain the API Performance symbol, and must be clearly labeled ‘Energy Conserving.’

7. Tune your engine from time-to-time

With time, the pistons of the engine misalign and become largely ineffective. If, and when this happens, the fuel consumption surges and increases the cost of gas. To solve this problem, you may wish to tune your engine from time-to-time.

This basically entails adjusting and modifying the internal combustion chamber or its control unit. Doing this boosts fuel efficiency, increases its power output, extends its lifespan, and overall performance. It saves you a lot of fuel costs over the course of time. The US Department of Energy postulates that tuning your engine regularly saves you a whopping 4% on fuel costs.

8. Reduce the loads or cargo

Too much cargo on board exerts a lot of pressure on the tires and engine. They subsequently require plenty of effort and rotational force to transport from one point to another. This extra force translates into higher fuel consumption which also means more money on your part.

To bring down your gas costs you might want to reduce the load or cargo on board. Reducing excess cargo achieves the exact opposite. You save gas by burning less fuel to generate the rotational force necessary to transport them from one point to another. This, in turn, requires less money on your part in the form of fuel expenses.

There you have it! You have the luxury to choose from a variety of hacks above to save money on gas. Given that gas costs constitute a significant portion of the household expenses, it is in your best interest to implement these hacks as soon as possible. Why don’t you consider doing so right away?